Silicone Sealant Clear
Silicone Sealant Clear is ideal for use wherever a strong, permanently elastic weatherproof adhesive, sealant, or caulk is needed. This product has excellent adhesion characteristics, high chemical resistance and will not sag or shrink due to severe temperature extremes.
Non-flammable
100% RTV Silicone Industrial Strength
Caulks Around Tubs, Sinks, Showers
Bonds Most Materials Similar or Dissimilar
Easy Application
Creates Waterproof Seal
Insulates Electrical Components
Seals Around Windows, Doors, Walls, etc.
Warning: Contains gas under pressure; may explode if heated
Silicone Sealant Clear is ideal for use wherever a strong, permanently elastic weatherproof adhesive, sealant, or caulk is needed. This product has excellent adhesion characteristics, high chemical resistance and will not sag or shrink due to severe temperature extremes.
Non-flammable
100% RTV Silicone Industrial Strength
Caulks Around Tubs, Sinks, Showers
Bonds Most Materials Similar or Dissimilar
Easy Application
Creates Waterproof Seal
Insulates Electrical Components
Seals Around Windows, Doors, Walls, etc.
Warning: Contains gas under pressure; may explode if heated
Silicone Sealant Clear is ideal for use wherever a strong, permanently elastic weatherproof adhesive, sealant, or caulk is needed. This product has excellent adhesion characteristics, high chemical resistance and will not sag or shrink due to severe temperature extremes.
Non-flammable
100% RTV Silicone Industrial Strength
Caulks Around Tubs, Sinks, Showers
Bonds Most Materials Similar or Dissimilar
Easy Application
Creates Waterproof Seal
Insulates Electrical Components
Seals Around Windows, Doors, Walls, etc.
Warning: Contains gas under pressure; may explode if heated
-
Use for sealing cracks in machinery, heating and ventilating duct work, plumbing fixtures, electrical connections, low pressure water and drain pipes.
Bonds nameplates, machinery flanges, glass, signs and electrical insulation, etc. Ideal for caulking windows, doors, walls, ceiling cracks and crevices. Forms in place gaskets. Paint will not adhere to cured material.
Directions:
Surface should be clean and dry and free of oil, tar, dirt and dust for best adhesion. Hold can at 45° angle and apply a continuous bead of 1/16” to 1/8” to the mating surfaces. Starts to cure immediately, fully cures in 24 hours and reaches optimum strength in 7 days.
Leave a small bead of material which will form a sealing “plug” for reuse. To use, gently pull “plug” and begin to use material. If plug breaks leaving the dispensing tip sealed, use a paper clip or other wire object to remove and loosen the remainder of the cured material.
Quantity:
Case of Aerosols (12-1)
CONTACT US FOR A FREE QUOTE